Publicidad
Idiomas disponibles
Idiomas disponibles
INDEX.
GENERAL SAFETY PRECAUTIONS.
ELECTRICAL CONNECTION.
INTENDED USE.
EXTENSION CABLE.
UNPACKING.
Carton contents.
INSTALLING THE DIAMOND BLADE.
To install the blade.
Removing the blade.
TO ADJUST DEPTH OF CUT.
HOW TO USE THE SIGHTING NOTCH.
VACUUM DUST COLLECTION.
WATER FEED SYSTEM.
GENERAL SAFETY INSTRUCTIONS
WARNING! Read all safety warnings and all
instructions. Failure to follow the warnings and in-
structions may result in electric shock, fire and/or seri-
ous injury.
Save all warnings and instructions for future ref-
erence. The term "power tool" in the warnings refers
to your mainsoperated (corded) power tool or battery-
operated (cordless) power tool.
WORK AREA SAFETY
1.
Keep work area clean and well lit. Cluttered
or dark areas invite accidents.
2.
Do not operate power tools in explosive
atmospheres, such as in the presence of
flammable liquids, gases or dust. Power tools
create sparks which may ignite the dust or fumes.
3.
Keep children and bystanders away while
operating a power tool. Distractions can cause
you to lose control.
ELECTRICAL SAFETY
1.
Power tool plugs must match the out-
let. Never modify the plug in any way. Do
not use any adapter plugs with earthed
(grounded) power tools. Unmodified plugs and
matching outlets will reduce risk of electric shock.
2.
Avoid body contact with earthed or
grounded surfaces such as pipes, radia-
tors, ranges and refrigerators. There is an
increased risk of electric shock if your body is
earthed or grounded.
3.
Do not expose power tools to rain or wet
conditions. Water entering a power tool will in-
crease the risk of electric shock.
4.
Do not abuse the cord. Never use the
cord for carrying, pulling or unplugging the
power tool. Keep cord away from heat, oil,
sharp edges or moving parts. Damaged or
entangled cords increase the risk of electric shock.
12
ENGLISH
ORIGINAL INSTRUCTIONS
PARALLEL GUIDE.
STARTING AND STOPPING TOOL.
To switch on.
To switch off.
Electronic overload protection.
HOW TO USE THE TOOL.
Operation.
MAINTENANCE.
Sharpening dull diamond blades.
Keep tool clean.
The carbon brushes.
FUNCTIONAL DESCRIPTION.
5.
6.
PERSONAL SAFETY
1.
2.
3.
4.
5.
6.
When operating a power tool outdoors,
use an extension cord suitable for outdoor
use. Use of a cord suitable for outdoor use re-
duces the risk of electric shock.
If operating a power tool in a damp loca-
tion is unavoidable, use an earth leakage
circuit breaker. Use of an earth leakage circuit
breaker reduces the risk of electric shock.
Stay alert, watch what you are doing and
use common sense when operating a pow-
er tool. Do not use a power tool while you
are tired or under the influence of drugs, al-
cohol or medication. A moment of inattention
while operating power tools may result in serious
personal injury.
Use personal protective equipment. Al-
ways wear eye protection. Protective equip-
ment such as dust mask, non-skid safety shoes,
hard hat, or hearing protection used for appropri-
ate conditions will reduce personal injuries.
Prevent unintentional starting. Ensure the
switch is in the off-position before connect-
ing to power source and/or battery pack,
picking up or carrying the tool. Carrying
power tools with your finger on the switch or
energising power tools that have the switch on
invites accidents.
Remove any adjusting key or wrench be-
fore turning the power tool on. A wrench or
a key left attached to a rotating part of the power
tool may result in personal injury.
Do not overreach. Keep proper footing and
balance at all times. This enables better con-
trol of the power tool in unexpected situations.
Dress properly. Do not wear loose cloth-
ing or jewellery. Keep your hair, clothing
and gloves away from moving parts. Loose
clothes, jewellery or long hair can be caught in
moving parts.
Publicidad
