J10 Reapeater Unit - Gardesa Biptronic Manual De Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

GB
LOW BATTERY CHARGE INDICATION
Low battery charge is indicated when the LED fl ashes continuously
about once a second.
REPLACING THE BATTERY
1 - Wedge a screwdriver under the lip of the cover on the upper
side of the battery holder.
2 - Remove the old battery and quickly insert a new one in the
right position (positive/negative poles). If you don't manage
this quick enough (a memory failure will cause the system code
to be lost), press the reset key briefl y and the LED will light up
for 1 second.
3 - Press the RED or GREEN key on the C10 key near the magnetic
sensor on the outer panel and the repeated unit will light up the
LED for 1 second to indicate the code has been reset.
64
J10 REPEATER UNIT
MAINTENANCE
MTPBB06-25 - Rev. 00

Publicidad

Tabla de contenido
loading

Tabla de contenido