ELICA EHI648SS Guía De Instalación, Uso Y Mantenimiento página 18

b. Attach at the top using 2 screws (one per side).
c. Permanently attach the two sections of the chimney
using 8 screws (4 per side).
10. Fix the lower chimneys:
a. Place on top of the hood the lower/rear part of the
chimney.
Note: the rear section is recognizable by the presence of
threaded nuts.
b. Place on top of the hood the lower/front part
checking for a good rear section fitting.
c. Secure using six screws (3 for each side).
11. Assemble the lower (narrow) trim strips to the lower vent
cover assembly.
Cut the upper (wide) trim strips to length to fit the upper
duct cover assembly.
Assemble the upper trim strips to the upper duct cover
assembly.
20. Install grease filter assembly.
13. Reinstall the panel.
14. Check all light bulbs to make sure they are secure in
their sockets.
Turn power on in service panel.
Check lights and blower operation per Care & Use
section of this manual.
18