IF THE VEHICLE DOES NOT OPERATE?
• When operating in overload conditions, such as running the vehicle against a fixed object,
through soft deep sand or mud, or over rough or uneven terrain, the overload circuit
breaker will automatically disconnect the power. After 30 or more seconds, the circuit
breaker will automatically reset, however-you must eliminate overload conditions to
resume normal driving.
• Press the accelerator pedal to activate the vehicle, followed by a single BEEP that indicates the toy is ready to
operate.
• If you let the vehicle idle for more than 10 minutes must repeat the activation process, simply by pressing the
pedal waiting for the BEEP.
• If during riding, the vehicle emits a CONTINUOUS BEEP must recharge the battery.
• If no initial beep is heard, the battery is low and must be charged.
• If the problem persists after recharging, to check the battery and the charger to a service center.
• Check that all plugs are properly connected.
• Check electrical switches. Replace if necessary.
• Check that the battery is connected to the electrical system.
IF THERE IS NO POWER?
• Fully recharge the battery. If the problem persist, check with an Authorized PEG PEREGO Service Center.
For your convience, PEG PEREGO offers after-sales service, directly or through a network of authorized service
centers for repairs or replacement parts.
If you have any questions about your Peg Perego vehicle, please call our toll-free service lines at;
Trained customer service representatives are available to take your call in English or Spanish.
PROBLEMS?
CUSTOMER SERVICE
U.S.A , call 1-800-728-2108
CANADA, call 1-800-661-5050