Battery Installation - Omron HEM-650 Manual De Instrucciones

1. Press both sides of the battery cover and
lift the cover off in the direction of the arrow.
2. Install two "AAA" Alkaline Batteries in the
battery compartment, so that + (positive)
and - (negative) polarities match the polarities
of the battery compartment as indicated.
3. Replace the battery cover. Make sure the
battery cover is securely in place.
BATTERY REPLACEMENT
Initial Set-Up
When the Low Battery Symbol appears on the display screen
remove all the batteries. Replace with two new batteries at the same
time. When the Low Battery Symbol blinks a brief period of usage
remains. Long life alkaline batteries are recommended.
NOTES:
• Measurement values stored in the memory will not be deleted
during battery replacement.
• After replacing the batteries, reset the date and time. Refer to page
11, Setting the Date and Time.
• Dispose of batteries according to applicable local regulations.

BATTERY INSTALLATION

Low Battery Symbol
8