Cycle Options - LG LDS5040ST Manual Del Propietário

8
PARTS AND FEATURES
8
PARTS AND FEATURES
CONTROL PANEL
CONTROL PANEL

Cycle Options

Press the desired cycle and then select the options for that
cycle.
HIGIÉNIC (SANITARY)
This high-temperature rinse sanitizes dishes and glassware in
accordance with NSF/ANSI Standard 184 for residential dish-
food establishments.
EXTRA SECO (EXTRA DRY)
Select the Extra Seco(Extra Dry) option for better drying
performance. This option adds 60 minutes of extra drying
time to the cycle.
EXTRA ENJUAGUE (EXTRA RINSE)
The Extra Enjuague(Extra Rinse) symbol indicates that an
extra enjuague(rinse) has been added to the cycle.
COMIENZO DIFERIDO (DELAY START)
The Delay Start feature allows you to delay the start of a selec-
ted cycle. Each time the Comienzo Diferido(Delay Start) button
is pressed, the delay time will increase an hour. The delay start
time can be set from 1 to 19 hours, in one-hour increments.
SEGURO PARA NIÑOS (CHILD LOCK)
The Seguro Para Niños(Child Lock) feature helps prevent your
settings from being changed during a cycle. Selecting this
feature locks all of the buttons, except for the Encender
(Power) button, on the control panel. This feature does not
lock the door.
To activate the Child Lock:
1. Press the Encender (Power)
2. Select the cycle (and desired options).
3.
Press and hold the Lavado Express (Quick) and Sólo
Superior (Upper Only) buttons for three seconds. The
Seguro Para Niños (Child Lock) indicator will illuminate in
the display once the Seguro Para Niños (Child Lock) is
activated.
button.
PANTALLA DIGITAL (DIGITAL DISPLAY)
The Pantalla Digital (Digital Display) on the control panel
shows the ESTIMATED cycle time. When the dishwasher is
powered up, the display will be blank. When the cycle and
options are selected, the display will show the total
estimated time to complete those selections. During opera-
tion, the display shows the remaining estimated operating
time.
NOTE
• The estimated time shown in the display does not include
delay times for heating water, etc.
• If Delay Wash is selected, the display shows the delay time
in hours.
• Time may vary depending on the soil level of your load.
• The RINSE AID symbol
ENCENDER (POWER)
Press the Encender (Power) button to turn on the control
panel. If no cycle is selected within four minutes, the
dishwasher will Encender (Power) o .
After the cycle is complete, the power automatically turns
If there is a power surge, power outage, or disruption of
any kind, the PF indicator will display and power will be au-
restarted.
SMART DIAGNOSIS
Should you experience any problems with your dishwasher,
it has the capability of transmitting data to your Smart Phone
using the LG Smart Laundry & DW Application or via you tele-
phone to the LG call center.
NOTE
Smart Diagnosis is a troubleshooting feature designed to as-
sist, not replace, the traditional method of troubleshooting
pends upon various factors, including, but not limited to, the
reception of the cellular phone being used for transmission,
any external noise that may be present during the transmis-
sion, and the acoustics of the room where the machine is lo-
nosis would accurately troubleshoot any given issue.
indicates that the rinse aid
-
-