Publicidad
Idiomas disponibles
Idiomas disponibles
Silicon Carbide
Grinding Stones
Tougher than aluminum oxide points, these
are made especially for use on hard materials
such as glass and ceramics. Typical uses
might be the removal of stilt marks and
excess glaze on ceramics and engraving on
glass.
O
Polishing Accessories
These include an impregnated
polishing point
and an impregnated
polishing wheel for
bringing metal surfaces to smooth finish; a felt
polishing tip and felt polishing wheel, and
cloth polishing wheel, all used for polishing
plastics, metals, jewelry and small parts.
Polishing points make a very smooth surface,
but a high luster is obtained using felt or cloth
wheels and polishing compound.
For best results
polishing
accessories
should
be used at speeds not greater than
15,000 RPM. Refer to Operating Speeds
section for proper tool speed setting.
Aluminum
Oxide Abrasive
Wheels
Use to remove paint, deburr metal, polish
stainless steel and other metals. Available in
fine and medium grits.
43
Sanding Accessories
Sanding discs are made to fit mandrel No.
25028. They can be used for nearly any small
sanding job you might have, from model
making to fine furnitur_ finishing. In addition,
there is the drum sander, a tiny drum which fits
into the Rotary Tool and makes it possible to
shape wood, smooth fiberglass, sand inside
curves and other difficult places, and other
sanding jobs. You replace the sanding bands
on the drum as they become worn and lose
their grit. Bands come in fine and coarse
grades.
Wire Brushes
Three different shapes of wire brushes are
available. Never use wire brushes at
speeds
greater
than 15,000 RPM. Refer to
Operating
Speeds section
for proper
tool
speed setting.
They remove rust from tools and other metal
surfaces, and clean and burnish metal parts.
Use for such jobs as cleaning electrical
connections to assure good conduction.
Bristle Brushes
This is an excellent cleaning tool on
silverware, jewelry and antiques. A bristle
brush can be used with polishing compound
for faster cleaning or polishing.
O
Cutting Wheels
These thin discs of emery or fiberglass are
used for slicing, cutting off and similar
operations. Use them for cutting off frozen
bolt heads and nuts, or to reslot a screw head
which has become so damaged that the
screwdriver won't work in it. Fine for cutting
BX cable, small rods, tubing, cable and
cutting rectangular holes in sheet metal.
High Speed Router Bits
For routing, inlaying, and mortising in wood
and other soft materials.
Use with Craftsman
No. 53099 Router attachment and No. 53034
Shaper/Router
table.
24
Publicidad
