Parts & Assembly - Igloo IBC41SS Manual De Instrucciones

PARTS & ASSEMBLY
PARTS
Your BEVERAGE COOLER requires no assembly. Before using, be sure to remove all packing
materials from the inside of the cooler. Check the unit for any damage, such as misaligned or
bent door, damaged door seals or sealing surfaces, broken or loose door hinges or latches,
or dents inside the refrigerator or on the door. If there is any damage, DO NOT use the
cooler. Return damaged item to the store where it was purchased.
LED Light
Glass
Shelves
ASSEMBLY OF DOOR HANDLE
1. Open the door and pull back the edge of
the gasket on the right side of the door.
2. Locate screws found in beverage cooler
cabinet. Working from the interior
the
of the door, put screws in the holes
where the handle is to be installed.
3. Align the handle with the screws and tighten
using screwdriver. Make sure the handle is
flush with the outside of the door.
NOTE: DO NOT overtighten screws, as this
may damage the surface of the door.
4. For a tight seal, make sure the gasket
edge is pushed back into place
and lays flat against the door.
7
Digital
Thermostat
Double-Pane
Glass Door