Honeywell Miller SkyORB Manual De Instrucciones Para El Usuario página 16

Using one supplied lifting strap and a forklift, lift mast and column assembly to the upright position and secure it to the base.
Set forks approximately
12" (305mm) apart.
Us e r I nst r uct i o n s - E ng l i sh
Step 6
Fig. 11a
Fig. 11b
Place lifting strap loops approximately
30" (762mm) from body of forklift.
16
Insert one of the supplied lifting straps
through the U-bolt on the telescoping
mast, and orient loops upward.
Set the forks on the forklift approximately
12" (305mm) apart (measuring from inside
of fork to inside of fork).
Move forklift into position directly in-line
with top of mast.
Insert a fork into each lifting strap loop.
Note: Strap loops, when placed on the
forks, must be at least 30" (762mm) from
ance when lifting. Tilt fork tips upward to
prevent straps from slipping off the ends of
the forks when lifting.
-