All Reset Mode - Kenwood TK-2400 Manual Del Usuario

At some point in time, you may desire to reset the transceiver
settings to their default values. This function will reset all
channels to their default frequencies and QT/DQT, the VOX
function to its default status, and all keys to their default
functions.
To reset the transceiver:
1 With the transceiver power OFF, press and hold the PTT
switch, the Side 1 key, and the Side 2 key while turning the
transceiver power ON.
• Continue to hold the keys for 2 seconds, until the LED lights
orange.
2 Release the keys.
• The transceiver announces "Confi rm" and returns to normal
operation.
• If the keys are released before the LED lights orange, All Reset
Mode will cancel.
26

ALL RESET MODE