►Removing the outer foil section
Press the foil frame release buttons [A5] and
lift the outer foil section [A9] upwards.
►Attaching the outer foil section
After turning the foil frame mark (
front, securely attach the outer foil section [A9]
to the shaver until it clicks.
►Replacing the system outer foil
1. Press the system outer foil release buttons
[A:] and pull down the system outer foil
[A2].
2. Align the foil frame mark (
system outer foil mark ( ) and securely
attach together until it clicks.
• Do not press the system outer foil release buttons with
excessive force.
Doing so may bend the system outer foil, preventing
complete attachment to the foil frame.
►Replacing the inner blades
1. Remove the inner blades [A;] one at a time.
2. Insert the inner blades one at a time.
Note
Do not throw away the foil frame.
) to the
) and the
FAQ
Question
Will the battery
deteriorate if not used
for an extended period
of time?
Can I charge the shaver
after every use?
Why should the adaptor
be disconnected after
use?
What is the constituent
of the dedicated oil?
Answer
The battery will deteriorate if not
used for over 6 months, so make
sure to perform a full charge at
least once every 6 months.
The battery used is a lithium‑ion,
so charging after every use will
have no effect on battery life.
Charging the battery for more
than 1 hour will not affect
battery performance, but
disconnect the adaptor for
safety and to save energy.
Constituent of the oil is liquid
paraffin.
17