Security And Data Management; Lock The Device; Memory Card Security - Nokia E75 Manual Del Usuario

Security and data management

Manage the data and software on your device, and take care
of the security of the device and its contents.
Important: Your device can only support one antivirus
application. Having more than one application with antivirus
functionality could affect performance and operation or
cause the device to stop functioning.

Lock the device

The lock code protects your device against unauthorized use.
The preset code is 12345.
To lock the device, in the home screen, press the power key,
and select Lock phone.
To unlock your device, select Unlock, enter the lock code, and
select OK.
To change the lock code, select
Settings and General
>
Enter the old code and then the new code twice. The new
code can be 4-255 characters long. Both letters and digits can
be used, and both uppercase and lowercase letters are
possible.
Write down the new code, and keep it secret and in a safe
place separate from your device. If you forget the lock code
and your device is locked, you must take the device to a Nokia
© 2009 Nokia. All rights reserved.
Menu Control panel
>
Security Phone and SIM
>
authorized service facility and additional charges may apply.
To unlock the device, the software must be reloaded, and the
data you have saved in the device may be lost.
You can also lock the device remotely by sending a text
message to the device. To enable remote locking, and to
define the text for the message, select
panel Settings
>
SIM card Remote phone locking
>
remote lock message, and confirm the message. The message
must be at least 5 characters long. Write down the text, as
you may need it later.

Memory card security

Select Menu
>
You can protect a memory card with a password to prevent
unauthorized access. To set a password, select
Memory card password
>
card. 8 characters long and is case-sensitive. The password is
stored in your device. You do not need to enter it again while
you use the memory card on the same device. If you use the
memory card on another device, you are asked for the
password. Not all memory cards support password
protection.
To remove the memory card password, select
Memory card password
Menu
and General Security
>
> Enabled. Enter the
Office File mgr..
>
> Set. The password can be up to
> Remove. When you remove the
Control
>
Phone and
>
Options
>
Options
>
129