REMOVING AND REPLACING THE WARMING DRAWER
Turn the power OFF before removing the warming drawer.
CAUTION
How to remove the warming drawer
1. Pull out the drawer until it stops.
2. Locate the locking clips near the back of each full-extension roller guide rail.
Using two hands, push down on the left clip and lift up on the right clip to
release the clips. Pull the drawer the rest of the way out.
Push down on the left guide
3. Pull the warming drawer away from the range.
How to replace the warming drawer
1. Position the ends of the full-extension roller
guide rails in the side rails of the drawer
opening.
2. Push in the drawer to close it and snap the locking clips
into place.
Lever
English - 82
Lever
Pull up on the right guide
Right roller guide rail