Load Clothes Into Dryer; Rack Dry Cycle; Auto Dry Cycle - Haier GDE 750AW Manual Para El Usuario E Instrucciones De Instalación

LOAD CLOTHES INTO DRYER

• The appropriate load should be 1/3 ~ 1/2 of the drum volume. Avoid too
much load, as space is needed to allow clothes free rotation for uniform and
wrinkle-proof drying.
• When drying big articles, only 2-3 pieces should be loaded at a time and
supplemented with small and medium-sized articles.
• For delicate clothes or less load, two towels may be added to get better
drying and wrinkle-proof effects.
• Do not excessively dry clothes to avoid wrinkles, shrinkage, roughness,
electro-static charge accumulation, and/or more lint.

Rack Dry cycle

• This program is designed specially for articles like sport shoes. During drying,
please make sure the articles are placed on the rack with no risk of
entangling the baffles while the drum is rotating.
Note: If drying rack is not in place, rolling inner tub could collide with drying
rack and causes damage to the dryer and drying rack.

AUTO DRY CYCLE

GDE/GDG 950AW
1. Press any button except "Off" button to power on.
• Turn on the power switch. The computer board will beep once and the dryer
will change from off status to the initial operating status (Heavy Duty program).
• If the "Start/Pause" button is not pressed in 5 min after powering on, it
automatically cuts off power and returns to off status.
• The dryer returns to off status immediately upon end of each cycle. Regardless,
the status of the control panel, pressing OFF will stop all operations.
• The default status is "Heavy Duty" program.
Super Capacity
Heavy Duty
Normal
Whites
Bulky
Auto
Dry
Cycles
Press Free
Dry
Delicate
Cool Down
Touch Up
Timed Dry
Cycle Completed
Custom
Rack Dry
Timed
Less More
Dry
Time Time
Cycles
High
Wrinkle Saver
Very
More
Medium
Remaining Time
Normal
Less
Low
Extended Tumble
Damp
No Heat
Sensor
Wrinkle
Dry Temp
Saver
Level
English
Louder
Softer
Start
Pause
Off
Off
Signal
22