Haier GDE 750AW Manual Para El Usuario E Instrucciones De Instalación página 24

English
Cycle Signal
Wrinkle Care
Cycles
LED display
Temp
Sensor Dry Level
Timed/Cycles
2. Press "Auto-Dry Cycles" button to select a suitable full automatic cycle.
• The Heavy Duty program will be automatically selected after powering on. If
another full automatic program is desired, press "Auto-Dry Cycles" button until
corresponding indicator turns on.
• To select your desired settings, the "Custom" function should be chosen.
• The dryer can memorize programs defined by user and display the previous
program upon next application of this function.
Use details are as follows (Features may vary per model purchased):
After powering on, press "Auto-Dry Cycles" until "Custom" status, then set
"Timed-Dry Cycles" to Timed Dry or Rack Dry and set status of other buttons.
Press "Start/Pause" button or after half a minute, the program defined by user will be
stored and will be directly displayed upon next use.
Note: The"Sensor Dry Level" button will be inactive during use of "Custom" function
and "Touch Up" cycle.
3. Press "Sensor Dry Level" button to select a suitable drying level.
• After powering on, the clothes dryer automatically sets dryness at "very", which
means a longer drying time. If other drying level is desired, press "Sensor Dry
Level" button to select.
4. Press "Temp" button to set a suitable drying temperature.
• After switching on, the dryer sets the corresponding temperature adapting to
different cycles selected. If other drying temperature is wanted, press "Temp"
button to enable such a selection. There are 4 available drying temperatures:
High, Medium, Low, and No Heat.
23
Indicates current program remaining time. Initial display time is 60 minutes.
This is subject to change depending on the moisture level in the dry load.
Auto-Dry Cycles
Heavy Duty
Normal
Whites
Bulky
Softer
Off
Heavy Duty
High
More Dry
Auto-program
Press Free
Delicate
Touch Up
Custom