12 MAINTENANCE
12.1 SAFETY PRECAUTIONS
Before performing any maintenance operations,
adopt the following precautions:
Make sure that all the parts of the stove have
cooled down.
Make
sure
extinguished.
by directive 89/391/EEC.
Make sure that the main power switch is off.
Make sure that the power supply cannot be
reconnected accidentally. Unplug the cord from
the socket on the wall.
Always use suitable tools for maintenance.
Once maintenance or repairs have been
completed, before operating the stove again,
restore all protection features and reactivate all
safety devices.
A suitable ash vacuum cleaner (canister) makes it
simpler to clean the ash.
12.2 ROUTINE USER MAINTENANCE
12.2.1
The stove requires simple yet frequent and thorough
operation at all times.
Clean the stove only when it's off and has cooled
down.
Daily or before each ignition, check that the
BURN POT is clean so that the air required for
holes (Fig.12.2).
Lift, remove the burn pot and clean the surfaces
and the compartments inside the burn pot
(Fig.12.3).
Reposition the brazier making sure that it perfectly
sits into its original position.
12.2.2
The ash bin should be cleaned every week or
whenever necessary.
To access the ash bin, open the ash bin door and
remove the bin (Fig.12.4) using the tool provided
Empty the bin into a special metal ash collection
container.
Vacuum any residual ash from the compartment
that houses the ash bin.
Reposition the ash bin. Close the doors.
52
USE AND MAINTENANCE
that
the
ash
is
completely
(Fig.12.1).
cod. 00 477 2290 - 04/2015 - Palazzetti - PN - Italy