Cleaning Metal Grease Filters; Lighting Unit - Faber DAMA Serie Instrucciones De Instalación

Cleaning metal grease filters
The filters must be cleaned every 2 months of operation,
or more frequently for particularly heavy usage, and
can be washed in a dishwasher.The metal grease filters
should be cleaned frequently in hot detergent solution or
washed in the dishwasher. Stainless steel cleaner should
be used on stainless rangehoods. Abrasives and scouring
agents can scratch stainless steel finishes and should not
be used to clean finished surface. Remove all water or
any other liquid from washing before re-installing filters.
• Remove the filters one at a time, supporting them
with one hand and turning the safety knobs (pull
and turn).
• Wash the filters, taking care not to bend them.
Allow them to dry before refitting.
• Replace them and fix them using the safety knobs
provided (pull and turn).
Replacing Activated Charcoal Filter
The filter is not washable and cannot be regenerated, and must
be replaced approximately every 4 months of operation, or more
frequently for particularly heavy usage.
• Remove the Filters one at a time, pushing them towards
the back of the unit and at the same time pulling downward.
• Remove the saturated charcoal filter by releasing the fixing
hooks.
• Fit the new filter and fasten it in its correct position.
• Replace, taking care to ensure that the handle faces forwards.

Lighting unit

• Remove the snap-on lamp cover
by levering it from under the metal
ring, supporting it with one hand.
• Replace the lamp with a new one
of the same type, making sure that
you insert the two pins properly into
the housings on the lamp holder.
• Replace the snap-on lamp cover.
Gu10 self-ballasted led
lamps – listed in ac-
cordance with
ul 1993/nmx-
j-578/1-ance/
csa c22.2 No.
1993
15