How To Check The Reception Status - Seiko 8B92 Manual De Instrucciones

CAUTION
The watch may display the wrong time if it fails to receive radio signals
●
properly because of interference. The watch may also fail to receive
radio signals properly depending on the location or radio wave receiving
conditions. In this case, move the watch to another place where it can
receive radio signals.
When the watch is out of reception range, its accurate quartz movement
●
(loss / gain: ±15 seconds per month on average) will continue to keep
the time.
The time signal transmission may be stopped during maintenance of
●
the facilities of the (each) transmitting station or because of a lightning
strike. In such a case, see the (each) station's website for fur ther
information.
• Websites of transmitting stations (as of March 2016)
U.S.A. : NIST http://www.nist.gov/pml/div688/grp40/wwvb.cfm
Germany : PTB http://www.ptb.de/cms/en.html.
China : NTSC http://www.ntsc.ac.cn/
Japan : NICT (Japan Standard Time Group) http://www.nict.go.jp/
18
8B92_E_1_37.indd 18-19

HOW TO CHECK THE RECEPTION STATUS

◆ How to Display the Reception Results
The second hand indicates the latest reception results (Yes/No) of a radio
signal for five seconds.
Press Button B once and then
1
release it.
B
* When Button B is kept pressed, the watch
starts manual reception.
2 The second hand indicates
the reception results.
If a reception was
successful: The second
hand points to Y
(Yes ; the 10 second position)
If a reception has
failed: The second
hand points to N
(No ; the 20 second position)
If Button B is pressed while the second hand
*
is moving to display the reception results,
the display function is cancelled and the
second hand resumes its normal movement.
2016/05/06 13:55
19