VHC200
Vacuum Cleaner Parts and Labels
1.
Identification plate which includes:
Model Code, Technical Specifications (see table on page
7), Serial no. CE Marking, Year of manufacture
2.
Dust container
3.
Dust container release lever
4.
Inlet
5.
Outlet
6.
Attention plate
Draws the operator's attention to the fact that the filter
must only be shaken when the vacuum cleaner is turned
off (see also par. "Primary filter shaker").
7.
Pneumatic system connection fitting.
This vacuum cleaner creates a strong air flow which is drawn
in through the inlet (4 - Fig. 1) and blown out through the
outlet (5 - Fig. 1).
Before turning on the vacuum cleaner, fit the vacuum hose
into the inlet and then fit the required tool on to the end part
(refer to the manufacturer's accessory catalogue or Service
Centre).
The diameters of the authorised hoses are given in the
technical specifications table.
The vacuum cleaner is equipped with a primary filter which
enables it to be used for the majority of applications.
Besides the primary filter, which retains the most common
types of dust, the vacuum cleaner can be fitted with a
secondary filter (absolute class H) with a higher filtering
capacity for fine dusts and dusts that are hazardous to health.
GB
C385
Vacuum cleaner description
Figure 1
Optional kits
Please contact the manufacturer's sales network for
information on optionals.
Instructions for installing the optional are included in the
conversion kit.
WARNING!
Use only supplied and authorised genuine spare parts.
Accessories
Various accessories are available; refer to the manufacturer's
accessory catalogue.
WARNING!
Use only genuine accessories supplied and
authorised by the manufacturer.
Packing and unpacking
Dispose of the packing materials in compliance with the laws
in force.
Model
A (mm)
B (mm)
C (mm)
Weight with packing
(kg)
4
Figure 2
VHC200
VHC200
(50 L)
(100 L)
700
700
1200
1200
1700
1700
86
89
01/2015