Sony Handycam DCR-SR47 Guía De Operaciónes página 35

Creating a disc with a
recorder, etc.
You can dub images played back on your
camcorder to a disc or video cassette,
by connecting your camcorder to a disc
recorder, a So W DVD writer other than
DVDirect Express, ect., with the A/V
connecting cable. Connect the device
in either way of[_ or [_]. Refbr also to
the instruction manuals supplied with
the devices to be connected. Select the
recording media that contains movies you
want to dub before starting the operation
(p. 38).
• Connect your camcorder to the wall outlet (wall
socket) using the supplied AC Adaptor fbr this
operation (p. 14).
[] A/V connecting cable (Supplied)
Connect tire A/V connecting cable to tire
input jacks of another device.
[] A/V connecting cable with S VIDEO (sold
separately)
When connecting to another device
via the S VIDEO jack, by using an A/V
connecting cable with an S VIDEO cable
(sold separately), higher qmflity images can
be produced than with an A/V connecting
cable. Connect the white and red plug
(left/right audio) and tire S VIDEO plug
(S VIDE() channel) of the A/V connecting
cable with an S VIDEO cable. If you
connect tire S VIDE() plug only, you will
hear no sound. Tire yellow plug (video)
connection is not necessar}_
A/V Remote
Connector
[_;_ Input
S VIDE()
(Red)
(Ydlow)
VIDEO
(Yellow)
(White)
E>
AUDI()
Signal flow
_<.
vo
Insert the recording media in the
recording device.
• If your recording device has an input
selector, set it to the input mode.
<
2 °
Connect your camcorder to the g,.
recording device (a disc recorder, ;
etc.) with the A/V connecting S
cable [] (supplied) or an A/V
connecting cable with SVlDEO
[] (sold separately).
• Connect your camcorder to the input jacks
of the recording device.
_5