Command Panel; 7- Use And Operation - Lotus F Serie Instrucciones De Uso Y Mantenimiento

Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

7.1- COMMAND PANEL

The command panel is installed in the front side of the oven and is differentiated according to the models,
as indicated in FIG.7 (electromechanical model) FIG.7/A (digital model).
FIG.7
(Command panel of electromechanic model)
2
1
12
11
10
9
8
FIG.7/A
(Command panel of digital model)
14
4
1
2
1
2
5
3
3
Pushbutton
1
"On - Stand
Pushbutton
2
"Economy"
Pushbutton
3
"Light Room"
Pushbutton
4
/
"Temperature
5
and ceiling/
4
Pushbutton
5
6
"Timer Set-
6
8
Pushbutton
/
"Arrow down/
9
Pushbutton
7
(1)
7
To exit the programming await 4 seconds without pressing any key
(2)
Keeping pressed the key "Timer Activation" you bring the timer in "STOP" and then arrange a
new cycle
USE AND OPERATI ON - 7
R
EF
NAME
.
When ON it indicates the operation of the
1 Green light
resistance in use.
2 Thermostat
Main switch (1-
3
0)
It indicates the temperature in the cooking
4 Thermometer
room.
Room
light
5
switch (I-0)
If pressed for at least 3 seconds it determines the igni-
tion (ON) or switching OFF (STAND-BY) of the regula-
by"
tor
At the first pressure, the power is limited , at the sec-
ond, it is deactivated.
At the first pressure the lights of the cooking room go
ON; at the second, they are switched OFF.
If pressed and released, it displays (Ref.11/12) the cur-
to set
rent value of temperature set, the luminous indicator
placed on the right of the display blinks to indicate that
a procedure of setting that can be performed within the
base"
following 4 seconds is in pogress;
Function "Delayed Ignition": If pressed and released
(with status of oven in STAND BY) displays on the dis-
play (Ref.10) the current value of the time in minutes
that has been set, the luminous indicator "h" blinks to
ting"
indicate that it is in progress a procedure of setting that
can be performed within the 4 following seconds;
Decreases/increases the value showed in the display
By pressing it, it is silenced the acoustic alarm in case
up"
of end of counting or alarm;
Starts the process of delayed ignition (with status of the
"Start"
oven in STAND BY)
.
LEGEND FIG.7
FUNCTION
Pos.0:
It deactivates the operation of the
resistance
Pos. 50 ÷ 500 °C:
It activates the opera-
tion of the resistance and sets the
desired temperature .
Pos. I:
It activates the oven operation ;
Pos. 0:
It deactivates the oven operation .
Pos. I:
Switches on the light ;
Pos. 0:
Switches off the light .
Instructions for use and maintenance
(1)
Rev. 11/2013 - EN

Publicidad

Tabla de contenido
loading

Tabla de contenido