Publicidad
The Duotone® is connected properly, but no sound is audible.
•
One or several Gain or Master controls are turned all the way down. Dial
in higher settings.
•
A shorted external speaker cable caused one of the internal fuses to blow.
Have a qualified technician change the fuse (ensure the replacement fuse
bears the proper rating).
The sound is washed out and muddy when you activate a
connected effects device.
•
The signal processor is shifting the phase of the signal that is being blended
with the original signal in the parallel effects loop. Turn the FX LEVEL
knob clockwise to the far right to avoid this type of phase cancellation.
7
Technical Specifications
Preamp Section:
Input
FX RETURN
FX SEND
Power Amp Section
Output Power
Frequency response
General data
Input Power
Max. Power consumption
Power supply fuse
Anode Fuse
Internal fuses
Operational temperature range -10°C - +35°C
Dimensions (W X H x D)
Weight
-10 dBV / 1 M Ohm
0 dBV / 1 M Ohm
-10 dBV (+6 dBV)/8 K Ohm (15 K Ohm)
100 watts into 4/8/16 Ohms
20 Hz - 50 KHz
230 volts AC (European version)
117 volts AC (North American version)
100 volts AC (Japanese version)
470 VA
T 2,5 A (230-volt version)
T 5 A (117-volt version)
T 6,3 A (100-volt version)
1 x T 1 A
2 x T 250 mA
29.5" x 12.6" x 9.9" (750 x 320 x 250 mm)
22 kg, 48.4 lbs
11
Publicidad
