Brandt BFL682ZNW Guía De Instalación Y Uso página 42

Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 43
Check that the air outlets are not blocked by food and ensure
A layer of frost
food is placed within the appliance to allow sufficient
occurs
in
the
ventilation. Ensure that door is fully closed. To remove the
compartment
frost, please refer to cleaning and care chapter.
Temperature
You may have left the doors open too long or too frequently; or
inside is too
the doors are kept open by some obstacle; or the appliance is
warm
located with insufficient clearance at the sides, back and top.
Temperature
Increase the temperature by following the "Display controls"
inside is too cold
chapter.
Doors can't be
Check whether the top of the refrigerator is tilted back by 10-
15mm to allow the doors to self close, or if something inside is
closed easily
preventing the doors from closing.
The water pan (located at the rear bottom of the cabinet) may
not be properly leveled, or the draining spout (located
underneath the top of the compressor depot) may not be
Water drips on
properly positioned to direct water into this pan, or the water
the floor
spout is blocked. You may need to pull the refrigerator away
from the wall to check the pan and spout.
The LED light may be damaged. Refer to replace LED lights in
The light is not
cleaning and care chapter.
working
The control system has disabled the lights due to the door
being kept open for too long. Close and reopens the door to
reactivate the lights.
21

Publicidad

Tabla de contenido
loading

Tabla de contenido