Safety Issues - Powervar 420VA Guía Del Utilizador

®
POWERVAR - SECURITY ONE UNINTERRUPTIBLE POWER MANAGER
Life Support
POWERVAR does not recommend the use of our UPM products on life support equipment where the failure
of the UPM could endanger or compromise patient safety or diminish the effectiveness of such life support
equipment. Reference page 109 of this manual.
2.0 – SAFETY ISSUES
IMPORTANT – SAVE THESE INSTRUCTIONS
THIS MANUAL CONTAINS IMPORTANT SAFETY INSTRUCTIONS. KEEP THIS MANUAL
HANDY FOR REFERENCE.
CAUTION: A BATTERY CAN PRESENT A RISK OF ELECTRICAL SHOCK.
SHORT-CIRCUIT CURRENTS CAN BE EXTREMELY HIGH AND CAN CREATE
SEVERE BURNS AS WELL AS THE RISK OF FIRE OR EXPLOSION FROM
VENTED GASES. ALWAYS OBSERVE PROPER PRECAUTIONS.
WHEN REPLACING BATTERIES, USE THE SAME QUANTITY, RATING AND
TYPE OF BATTERIES USED BY POWERVAR. THE BATTERIES USED IN THIS
UPM ARE SEALED LEAD-ACID AND ARE MAINTENANCE FREE. CONSULT
THE CHART BELOW FOR QUANTITY AND RATING. PROPER DISPOSAL OF
BATTERIES IS REQUIRED. REFER TO YOUR LOCAL CODES FOR
DISPOSAL OF BATTERIES.
UPM Rating
420 VA
600 VA *
800 VA *
1100 VA *
1440 VA *
2200 VA
3000 VA
QUANTITY AND BATTERY
RATING
2 X 21W @ 12 VOLT
2 X 34W @ 12 VOLT
2 X 34W @ 12 VOLT
2 X 51W @ 12 VOLT
4 X 34W @ 12 VOLT
8 X 34W @ 12 VOLT
8 X 34W @ 12 VOLT
* Also available in Rackmount version
3