SENS-O-LOCK WC9000+ Guia Del Usuario página 14

• The connector locks into the
base of thehandset.
• To remove the cable, grasp
the textured ring and pull
back. The cord can now be
removed by pulling directly
away from the handset while
keeping the ring retracted.
• It is important to ensure that
the cable is lined up correctly
with the connector on the
handset.
• Do not attempt to line up
the connector by twisting or
rotating the connector
ALWAYS LINE UP THE
NOTCH AND SLOT
BEFORE ATTEMPTING
TO CONNECT THEM.
• The handset can operate
without the cord connected,
but if younotice any damage
to the cord or the connectors
contact your service provider
immediately.