SENS-O-LOCK WC9000+ Guia Del Usuario página 19

Your Vehicle Battery
• The WC9000+ IID is connected to your vehicles power
delivery system. When not in use it draws a nominal amount
of power. When driving or charging the handset, power draw
is increased. The device was designed for use in vehicles with
fully operational and problem-free electrical systems. If you
have a vehicle with known issues with its battery or electrical
system, it is important to notify your service provider before
installation.
• If maintenance is performed on your vehicle that requires
disconnection of your vehicles battery, ensure that the
WC9000+ system is shut down completely beforehand.
• If your vehicle requires a "jump-start" it is advised to
disconnect the handset and ensure the system is powered
down. Contact your service provider with any questions.
Temporary Lockouts
Depending on your jurisdiction and program requirements, your
device may be programmed to restrict use if consecutive failed
tests are recorded. These temporary lockouts may have different
thresholds than those that cause the device to enter 'early
service.' If this limit is reached, the device will display a message
stating that use is limited and list the reason i.e. "Failed Tests"
or "Missed Tests." The duration of this
lockout is set by your jurisdiction's
requirements.
It is important to note that this is a
lockout in addition to the required wait
time after a failed test.
Contact your service provider with any
questions.