Mount Wheels In Frame And Fork | Disc Brake Model; Mount Cassette - riesel Design b170 Manual Del Usuario

lever OPEN
CLOSE
lever position closed
– 32 –
CLOSE
lever CLOSE

Mount wheels in frame and fork | disc brake model

Frame and fork, which are designed for disc brakes, may have different dropouts to attach the wheels The
"b170 disc" wheelset can be configured with various axle standards in order to attach the wheels in the drop-
outs of the frame and fork
Possible axle standards on the front wheel:
– quick release skewer – hub with 100 mm mounting width
– 12 mm thru axle | QR12 – hub with 100 mm mounting width, thru axle Ø 12 mm
– 15 mm thru axle | QR15 – hub with 100 mm mounting width, thru axle Ø 15 mm
Possible axle standards on the rear wheel:
– quick release skewer – hub with 135 mm mounting width
– 12 x 142 mm thru axle – hub with 142 mm mounting width, thru axle Ø 12 mm
Check in advance as to which axle standards are available at the dropouts from the fork
N O T E
and frame in order to prevent possible incompatibilities When in doubt, contact your
dealer or rie:sel design
1 Place wheels in the dropouts
2 Mount thru axle or quick release skewer according to the manufacturer's specifications

Mount cassette

1 Mount cassette according to the manufacturer's specification
– 33 –