Battery Saver - Kenwood TK-3230DX Manual De Instrucciones

BATTERY SAVER

This transceiver has been designed to give you the most out of
your battery power. The battery saver function decreases the
amount of power used when a signal is not being received and
no operations are being performed.
While using the transceiver, battery saver will automatically
switch ON after 5 seconds have elapsed with no operations or
received calls. Operating the transceiver or receiving a call will
switch this feature OFF until 5 seconds of non-operation occurs
again.
To turn this function on or off:
1 Enter the Setting Mode {page 24}.
2 Press the
3 Press the MENU key then press
select "
(battery saver off).
Note:
◆ While the Battery Saver is operating, the LED may fl ash green when
receiving a QT/DQT signal which does not match the QT/DQT tone/
code set up in your transceiver.
42
or key to select "
" (battery saver on) or "
".
or to
"