Zone Parameters - Ariston CLIMA MANAGER Instrucciones Operativas

zone parameters

Press the Menu button.
Turn the knob and select menu 4 "Zone 1
Parameters"; press the confi rmation but-
ton. Turn the knob and select:
40 Temperature Settings
press the confi rmation button and turn the
knob to select one of the following param-
eters:
400 daytime T (comfort temperature)
401 night-time T (reduced temperature)
402 fi xed heating T
press the confi rmation button and turn the
knob to change the value, then press the
confi rmation button. Press the esc button to
return to the previous screen.
Turn the knob to select parameter 41 "Ac-
cess code"; press the confi rmation button to
select it. Turn the knob to enter the access
code and press the confi rmation button.
Turn the knob and select parameter:
- 42 Zone 1 settings
press the confi rmation button and turn the
knob to select one of the following options:
420 Temperature range
421 Temperature adjustment
422 Temperature adjustment curve
423 Parallel shifting
424 Room infl uence
425 Max. temperature
426 Min. temperature
Press the confi rmation button and turn the
knob to change the value or setting, then
press the confi rmation button.
Press the exit button to return to the previ-
ous screen.
- 43 Zone 1 diagnostics
press the confi rmation button and turn the
knob to select one of the following options:
430 Room T
431 Set T
432 Heat request status
433 Pump status
Press the detail button to display the value
or the setting.
Press the exit button to return to the previ-
ous screen.
- 44 Zone 1 diagnostics
press the confi rmation button and turn the
knob to select one of the following options:
440 Pump check
Press the detail button to display the value
or the setting.
Press the exit button to return to the previ-
ous screen.
Repeat the steps described above to set the
values for zones 2 and 3, selecting the fol-
lowing menus:
5 "Zone 2 Parameters"
6 "Zone 3 Parameters"
IT GB
59