Zone Button Operation - Lutron GRAFIK Eye QS System Manual De Instrucciones

Zone Button Operation

Each column of buttons represents one
zone of lights. Pressing any button on a
column turns on the info screen and
displays the zone's current light level and
current energy savings.
Pressing the raise and lower buttons on a
zone causes different actions depending
on zone type (see below).
Dimmable zones:
• Press and hold to raise/lower all lights in a
zone; release to stop
• Press raise or lower to stop a zone that is
fading
• Raising lights from off to full on or lowering
from full on to off takes 5 seconds
• Press raise and lower simultaneously to
toggle between full on and off
Non-dim zones:
• Press raise to take light zones to full on
• Press lower to take light zones to off
R
1 2 3 4
2 3
GRAFIK Eye QS System Installation and Operation Guide 13
®
5
LEDs indicate light level
Note: See page 18 for an
explanation of the LED
display for each type of
load in a zone.
Zone Raise
Zone Lower