KTM Power Parts SXS08250500 Manual Del Usuario página 9

Attaching the silencer
– Attach the clamps included in the scope of supply to the silencer (see
photo), connect to the header and hold in place with the tension spring
included in the scope of supply.
Front clamp (A) SXS07250515 (TZ 5)
Rear clamp (B) SXS07250516 (TZ 6)
A
B
Use the M6x25 with DIN125 A6.4 washer for the front clamp.
Use the M6x50 with DIN125 A6.4 washer for the rear clamp.
Warning (applies to EXC 08 and later models):
Use the 24x3mm spacing washer for the front fastening clamp and the
24x5mm spacing washer for the rear fastening clamp (see photo).
Align the entire exhaust system and tighten all of the fixing screws.
9