Functional Components - Dreve Drufosmart scan Instrucciones De Trabajo

Drufosmart scan
16. Plates and labels have to be main-
tained in a well legible condition and
must not be removed.
17. Before cleaning and maintenance
of the unit or the exchange of parts the
plug has to be disconnected.
18. The opening of the unit and repairs
are only to be carried out by accordingly
trained experts.
19. Only those appliances and spare
parts may be used which are released
by the manufacturer. We are not
responsible for damages caused by
the use of foreign parts.
5. Initiation
Before initiation make sure that the
voltage indicated on the type plate
meets the voltage of the power source.
Connect the unit to an air compressor.
Push the pressure hose (included in the
delivery) into the compressed air con-
nection (9) until it is locked in place. The
hose does not need any further fasten-
ing. To release the pressure hose push
the blue ring upwards and draw the
hose off by pulling downwards.
The pressure of the compressed
air line must not exceed 10 bars.
Put the power cord into the female
connector (33) and create a connec-
tion with the Euro/USA plug.
30
20. Arbitrary rebuilding or modifications
are not permitted due to safety reasons.
21. The required operation and main-
tenance conditions mentioned in these
working instructions are to be complied
with imperatively. When working with
the Drufosmart scan the general acci-
dent prevention regulations have to be
observed.
Important: Before the first initiation
please read the working instructions
thoroughly. In case of comprehen-
sion problems contact your responsi-
ble dealer or Dreve Dentamid GmbH,
if necessary.
Scope of delivery
1 Drufosmart scan
1 drawer for granules
1 insert bowl and nub plate
1 tension ring with ventilation valve
1 base range of blanks
1 power cord
1 air connection hose incl. hose
clamps and fast coupling
1 working instructions in 6 languages

6. Functional components

34
9
4
13
10
11
No. Description
1 Scanner
2 Display
3 Key pad
4 Heating element
5 Heating handle
6 Nub plate and insert bowl
7 Drawer for granules
9 Compressed air supply
43
10 Handle plate reception
11 Plate reception
12 Ventilation valve
13 Tension ring
33 Mains supply/fuse carrier
34 Activation lever
43 Main switch
2
3
1
5
12
6
7
33
9
31