Maintenance Instructions - Paoli DP 6000 BIAS Manual De Instrucciones

MAINTENANCE INSTRUCTIONS

Before any maintenance, always make
sure that the air supply of the wheel gun
is depressurized (no air pressure), and
only after unplugging the wheel gun and
performing maintenance.
L Use only recommended lubricants.
L At regular intervals supply the wheel gun
with the addition of lubricant (special oil
for Paoli air impact wrench motors or very
fluid oil for air tools), in order to keep
the appliance efficient and to extend its
service life. Place a few drops of oil in
the air inlet of the wheel gun
Fig.2-A).
L Ship the wheel gun back to the PAOLI
facilities at least once per year for the
complete overhauling.
L Do not carry out maintenance with
improper tools, make use of the attached
exploded drawing with the list of spare
parts.
L Indicate the parts most subject to wear,
to be dismantled and checked at regular
intervals, as well as a list of malfunctions,
if any, and the corrective action.
SCRAPPING
Separate the components on the basis of the nature of the materials of which they are made. The
components must be disposed of according to the laws in force.
ENGLISH
8
OPERATING AND MAINTENANCE MANUAL
L Use only genuine spare parts and
authorized service organizations.
L Before
recommended to run the wheel gun
clockwise and anticlockwise (please pay
attention to the exhaust coming out
from the top of the wheel gun during
this operation -
putting special oil for Paoli air impact
wrench motors (~5cc) or very fluid oil
for air tools into the air inlet. These
operations must be performed in a
(view figure
suitably equipped working environment,
complete with extraction equipment
for nebulised particles. Use personal
protective equipment.
L If the wheel gun is left unused for long
periods we recommend putting some
oil (special oil for Paoli air impact wrench
motors) into the air inlet
Fig.2-A) and letting it run for a few
seconds before putting it away. In this
way the internal components will remain
lubricated.
every race it is
view figure
(view figure
strongly
Fig.2-B)