Descargar Imprimir esta página

Warnings - Assembly Text Instructions - Maintenance; Galvanised Steel - Extremis Hopper Picnic Manual

Ocultar thumbs Ver también para Hopper Picnic:

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 43
Warnings – Assembly text instructions – Maintenance
English
WARNINGS
General
Do not use any sharp tools to open the
packaging.
We strongly advise against using power tools.
Tripping hazard, mind your step.
Do not put out cigarettes on the table.
Not grafitti proof.
Do not leave children unattended whilst playing
on the table.
away from babies and children.
Colours can differ over years and from batch to
batch.
Product
Do not drag the table, but carry it with minimum
2 people.
Anchoring the product has to be done by
qualified people.
For anchoring: use suitable bolts or screws from
a specialized store depending on the material
your terrace is made of.
The packaging material of the legs must stay
intact, you need it to attach the legs to the
tabletop.
180 cm: max. 4 people or 320 kg per bench - 240
cm: max. 5 people or 400 kg per bench - 300
cm: max. 6 people or 480 kg per bench - 360 cm:
max. 7 people or 560 kg per bench
Regularly clean the flat surface of the legs.
Wood
When delivered, the wood is untreated.
Wood is a natural material and its look is different
for every slat, plank and tree.
Wood will gradually become rougher and start
to turn grey as a consequence of exposure to the
sun and rain. We recommend oiling the wood
once or twice a year. 1x before the Summer and 1x
after the Summer as protection for the Winter.
Cleaning regularly with mild detergent. Never use
a high pressure cleaner as this will roughen the
wood's smooth surface and irreparably damage
the wood's fibress.
Thorough cleaning with Extremis Wood Cleaner.
We strongly recommend that you treat your wood
with wood oil to protect it from stains - Small
cracks and crevices can also appear as part of
28
this process. We strongly advise everyone to treat
the furniture with our Wood Protector. It is best to
repeat this treatment each year.

Galvanised steel

Galvanisation will become less shiny when used
outdoors.
Flame retarding - NEN-EN13501-1 A1 - Class A1
products will not contribute to fire in any stage,
including fully developed fire. For this reason,
they are assumed to be capable of satisfying all
requirements of all lower classes as well.
Possible impurities in the immersion tank can
cause black marks during galvanization, which
are intrinsic to this industrial finishing technique.
White marks on this zinc layer are also intrinsic
to this procedure and will disappear when the
furniture is put outdoors.
This industrial finishing technique may result in a
rougher surface. This is intrinsic to the process.
Powder-coating
White powder-coating requires more
maintenance.
Do not use abrasive scouring powders or
scourers as they will scratch the surface.
Colour can fade to some extent when exposed to
UV.
Flame retarding - NEN-EN13501-1 A2-sl -
Satisfying the same criteria as Class B for the
SBI-test according to EN13823. In addition,
under conditions of a fully developed fire these
products will nog significantly contribute to the
fire load and fire growth.
Dark colors can get very hot in sunny weather.
ASSEMBLY INSTRUCTIONS
Hopper picnic - p6
1. Remove the lid of the box. The packaging
material must stay intact for the rest of the
assembly!
2. Remove the four screws from the two boards
that prevent the table legs from moving during
transport. Fold down the cardboard flaps to
have better access to the legs. Take them out the
box and position them as shown in the drawing
(depending on the size of the table).
3. Put the lid back on the box.
4. Put the 2 boards mentioned in step 2 on top of
the lid.

Publicidad

loading

Este manual también es adecuado para:

Hopper comboHopper table