USE
Figure 5: Pressing the adhesive compound on the underside of the pickup
1)
Remove the backing from the supplied adhesive compound.
2)
Press some of the adhesive compound (just enough to cover
the "footprint" of the pickup) on the underside of the pickup.
3)
Press the pickup onto the bridge of your instrument or onto
the soundboard, near the bridge.
28
C411
MANUAL
III
4.3
Hints on Microphone Placement
C411
MANUAL
III
USE
Hints on
Microphone
Placement
Guitar
Violin
Banjo
Zither
29