Remington iLIGHT Pro Guía De Uso Y Cuidado página 15

Using the Remington iLIGHT Hair Removal System for Treatment
® ®
DO NOT FLASH A PATCH OF SKIN
MORE THAN ONCE; YOU WILL NOT
GET AN ACCURATE RESULT AND MAY
CAUSE SIDE EFFECTS.
* Side effects include blistering,
burns, and changes in skin tone. Wait
15 minutes to see if acute side effects
develop. If you are unsure about your
skin's reaction to a particular energy
level, do not treat with that energy
level. Wait 24 hours before treating to
be sure you have selected the appro-
priate energy level.
28
STEP 5: TREAT YOUR SKIN
The Remington iLIGHT device can flash
approximately every 3 seconds and is
ideal for treating both larger and
smaller areas.
Periodically, if either the hand
piece or base unit gets too hot, the
"Hourglass" icon will flash and the
unit will beep. Wait for a few minutes
to allow the device to cool down.
There is no need to shut the unit
down, as the hourglass and beeps
will turn off when the device is ready
to use again. The number of flashes
delivered before the cool down state
depends on several factors, including
how fast you apply the treatments,
and the room temperature.
See Figure 4.
Figure 4
5a. Ensure that the energy level is on
the correct setting. See Table 2 for
details about the different settings.
SKIN CONTACT SENSORS
5b. Apply the TREATMENT CAP to
the skin, making sure the skin is
spread evenly and smoothly. Make
sure the SKIN CONTACT SENSORS
on the TREATMENT CAP are in full
contact with the skin.
29