Disposal Of Device - Remington iLIGHT Pro Guía De Uso Y Cuidado

Replacing the Replacement Cartridge
Figure 5
1. Turn the POWER SWITCH off and
unplug the POWER CORD from the
electrical outlet.
Note: Allow the system to cool down
for 5 minutes before attempting to change
the REPLACEMENT CARTRIDGE.
2. Grasp the TREATMENT CAP with one
hand while pressing both TREATMENT
CAP RELEASE BUTTONS with the
other hand and pull gently. Set the
TREATMENT CAP in a safe location
taking care not to damage the FLASH
WINDOW and other components.
3. Grasp the REPLACEMENT CARTRIDGE
and gently pull away from the
HAND PIECE. Discard the used
REPLACEMENT CARTRIDGE with
normal household trash.
WARNING: Ensure REPLACEMENT
CARTRIDGE has cooled for 5 minutes
before handling. Exercise care when
replacing the REPLACEMENT CARTRIDGE.
38
4. Push the new REPLACEMENT CARTRIDGE
gently into place, taking care not to touch
the lamp tube or damage the pins.
Note: the REPLACEMENT CARTRIDGE
must be oriented so that the side with 4
pins is on the left, and the side with 1 pin
is on the right.
5. Gently push the TREATMENT CAP back
into the HAND PIECE making sure both
sides click into place. Note: the longer
tab (with gold circuits) must be on top
to properly fit.

DISPOSAL OF DEVICE

Please follow the local, state and/or
government requirements for disposal
or recycling of electronic devices for
your Remington iLIGHT device or any
of its accessories.
39