Publicidad
ClearVue Mini™
Thank you for your purchase of the CLEARVUE MINI Condensate Pump.
This pump is designed to automatically remove the condensate water
that collects in the primary drain pan of mini-split air conditioners just like a
standard mini-split pump but with many customer inspired improvements.
The pump is equipped with a tank that collects the water from the drain tray
in the appliance. When the water collected in the tank reaches a sufficient
level, the pump switches on and pumps the water to a remote location.
When the tank is sufficiently empty the pump automatically switches off.
The tank is outfitted with LED status lights that show the status of power
available, pump running and alarm conditions. This allows for easy
troubleshooting and status checking. This pump also has a rubber mounting
pad to reduce noise and keep the pump in place during operation. The
pump is also equipped with a switch that activates when the water in the
tank reaches an overflow condition. The overflow safety switch may be
connected to turn off the appliance if the high water condition occurs.
This pump handles dual voltage 120/240 and 50/60 Hz so it can be used in
any installation. The CLEARVUE MINI is not designed for use with humidifiers.
Max input temperature is 60°C/140°F.
Floatless Sensor
With DiversiTech's Floatless Sensor™ technology, the CLEARVUE MINI
eliminates the float - one of the most common problems with conventional
condensate pumps. CLEARVUE MINI uses patent pending water sensing
technology to detect condensate so that there are no more stuck floats!
CLEARVUE MINI also features a see-through tank to give the service tech and
homeowner a clear view of water, blockage, and buildup in the tank. This
clear tank allows for quick troubleshooting due to normal buildup caused by
daily condensate generation.
I
N
T
R
O
D
U
C
T
I
O
N
3
Publicidad
