Publicidad
Pump Operation
Apply power by properly wiring the pump. Check for green LED illumination
which indicates that the power is available. Test the pump operation and
safety switch by manually filling the tank. Be sure that the red ALARM LED
lights when the pump has reached an overflow condition and will properly
shut off the system.
Leak Check: Operate the pump by filling tank to trigger operation. Pump
RUN will be indicated by the amber RUN LED.
Homeowner Instruction: Instruct the homeowner about the pump's general
operation, how to look for the ALARM LED if they think that there is system
trouble.
LED Indicator Color Status
•Green LED
Power is applied to the pump. All systems enabled.
•Amber LED
Pump is running normally.
•Red LED
Pump is in the High Level Alarm. A/C system disabled.
Pump Maintenance
Always disconnect power before performing maintenance. Periodically
inspect the tank to assure it is free of accumulated dirt or sludge. Do not use
solvent cleaners. Clean tank with soap and warm water only.
Clean inlet and outlet piping. Tubing may be cleared of slime or debris
instantly with a Gallo Gun tool (GG-1) and Swoosh cartridges (GGC-12).
Reassemble system and check for correct operation.
Ensure that the pump is primed at least seasonally to ensure proper
operation of the pumping mechanism. The pump cannot run dry and
failure to prime may cause poor or no operation.
O
P
E
R
A
T
I
O
N
9
Publicidad
