Cover Removal And Installation - Permobil ROHO AGILITY Operación Manual

Cover Removal and Installation

Warnings:
• DO NOT remove or install the AGILITY cover while the individual is in the wheelchair.
• DO NOT use an AGILITY without the cover, foam pad, and, if applicable, the air insert or foam insert.
• Inspect the cover for damage and replace if necessary.
To Remove The Cover
1) On the wide end of the shell: Pull down
to release the cover flap.
To Install the Cover
1) On the back side of the shell, push the
tab, but not the handle, through the slot
at the narrow end. Press to attach the
tab to the shell.
2) Lift the cover over the narrow end of the
shell.
To Remove the Foam Pad, Air Insert or Foam Insert
1) Unzip the cover.
2) Remove the foam pad from inside the cover with the insert still attached.
3) Detach the insert from the fastener strip in the cutout area of the foam pad.
4) For air inserts: Pull the valve hose back through the hole in the foam pad.
ROHO AGILITY Back System Operation Manual
2) Pull the cover away from the shell.
3) Make sure the zipper faces the shell,
and press to attach the cover to the
front side of the shell.
5
3) Lift the cover over the narrow end of the
shell. Pull to release the hook fastener
strip on the tab.
4) Pull the tab through the slot.
4) Pull the wide end of the cover over the
wide edge of the shell. Press to attach
the cover flap to the shell.