Assembling Your Vacuum; Using The Motorized Floor Nozzle; What Does The Brushroll Indicator Light Mean - Shark Rocket HV380 Serie Manual De Instrucciones

ASSEMBLING YOUR VACUUM

STEP 1
Insert the wand into the
motorized floor nozzle
connector, pressing it in
until it clicks into place.
CLICK
STEP 3
Snap accessory
storage clip onto
the wand. Store
one accessory on
top holder and
one accessory on
bottom holder.
7
s h a r kc l e a n . c o m
STEP 2
Insert the handheld
vacuum into the top of
the wand, pressing it in
until it clicks into place.
CLICK

USING THE MOTORIZED FLOOR NOZZLE

NOTE: Before vacuuming your
delicate area rugs or carpet, refer to
the manufacturer's recommended
cleaning instructions.
WHAT DOES THE BRUSHROLL
INDICATOR LIGHT MEAN?
Solid Green
The brushrolls are on and working
as they should.
Solid Red
There is a jam in the brushroll area.
Turn your vacuum off and remove
the blockage.
No Light
The brushrolls are off because the
vacuum is off.
NOTE: The motorized floor nozzle
and handheld vacuum have LED lights
that illuminate the floor surface being
cleaned. The lights turn on automatically
in either speed setting.
TIP: You can attach the handheld
vacuum directly to the motorized floor
nozzle for convenient stair cleaning.
STEP 1
Plug the unit in and
recline the wand.
STEP 2
Slide the power switch to appropriate
speed setting (I or II) and start
cleaning.
Bare Floor, Area Rugs (I) – The
brushroll and the Soft Roller both spin
together slowly to clean bare floors and
delicate area rugs. The Soft Roller traps
fine dust and large particles, while the
brushroll directs that debris to the
suction channel.
High Pile Carpets (II) – Both brushrolls
spin faster, working together to pick
up debris below the surface of your
carpets.
NOTE: For deep cleaning per ASTM F 608
(embedded dirt in carpets) please set to High Pile
Carpets (II).
s h a r kc l e a n . c o m
8