Metra INST-6000 Instrucciones De Instalación página 6

Kit Assembly 99-6500
DIN radio provision
1. Remove the metal "DIN" cage from your
aftermarket radio.
2. Slide the cage into the kit and secure by
bending the metal locking tabs down.
3. Locate the factory wiring harness in the
dash. Metra recommends using the proper
mating adapter from Metra or AXXESS.
Re-connect the negative battery terminal
and test the unit for proper operation.
(Figure A)
4. Slide the aftermarket radio into the cage
until secure. (Figure A)
5. Reassemble dash in reverse order of
disassembly. (Figure B)
(Figure B)
2.2
99-6501
Section 3
Chrysler/Dodge/Eagle/Ford/
Jeep/Lincoln/ Mercury/
Plymouth 1974-2003
99-6501
KIT FEATURES
• DIN and ISO DIN provisions
KIT COMPONENTS
• A) Radio housing • B) ISO DIN faceplate
• C) Spacer • D) Snap spacers • E) (2) ISO DIN brackets
• F) (4) 5mm flat-head screws• G) (2) #6 Self-tapping screws
A B
E F
TOOLS REQUIRED
• Phillips screwdriver • Socket wrench • Cutting tool
C D
G
3.0