Optical Loss Test Set Function - Promax PROLITE-65 Manual De Instrucciones

USER'S MANUAL PROLITE-65
To capture a new reference value, press
To make or consult a data register, refer to the section LOGGER Function.

4.2.3 OPTICAL LOSS TEST SET Function

This function measures signals emitted by a test source (e.g. PROLITE-105). It is
equivalent to the previous one but it has more options such as relative measures and
measurement with respect to the threshold value.
To access this function:
1.- Press CONFIG
2.- Press
3.- Press SEL
below).
The display is divided into three equal rows. Each row shows measurements for
each wavelenght. Next are described each one of the fields on screen:
[1] Wavelenght at which it is measuring. Wavelenght at 1310 nm corresponds to
the UPSTREAM and the other two (1490 y 1550 nm) to the DOWNSTREAM.
07-2010
[2].
or [5] until pointing at OPTICAL LOSS TEST SET.
[4] or CONFIG
Figure 7.- OPTICAL LOSS TEST SET Screen.
or [5] simultaneously.
[2] to get into this function (see figure
Page 15