Overview Drawing; Receiving The Product; Inspecting The Product; Scope Of Delivery - Grundfos Unilift AP12 Instrucciones De Instalación Y Funcionamiento

2.2 Overview drawing

Outlet port
Pump
sleeve
Inlet strainer
Fig. 1 Unilift AP pump

3. Receiving the product

CAUTION
Crushing of feet
Minor or moderate personal injury
- Wear safety shoes when handling
the product.
- Use the pump handle to move the
pump. Do not lift it by the power
cable.

3.1 Inspecting the product

Check that the product received is in
accordance with the order.
Check that the voltage and frequency of the
product match voltage and frequency of the
installation site.

3.2 Scope of delivery

The box contains the following items:
• pump
• power cable
• float switch (if included with this model)
• installation and operating instructions.
6

4. Installing the product

Handle with
clamp
Float
switch
DANGER
Electric shock
Death or serious personal injury
- The installation, electrical
connection, and maintenance of
the product must be carried out by
an authorized electrician in
accordance with the National
Electrical Code and any state, local
governing codes and regulations.
DANGER
Electric shock
Death or serious personal injury
- Switch off the power supply before
starting any work on the product.
- Make sure that the power supply
cannot be accidentally switched
on.
DANGER
Electric shock
Death or serious personal injury
- Pump installation in a sump pit,
basin or tank must be carried out
by qualified, specially trained
persons in accordance with the
National Electrical Code and any
state, local governing codes and
regulations.
WARNING
Moving parts
Minor or moderate personal injury
- Make sure that persons cannot
come into contact with moving
parts.
Do not lift the pump by the power
cable or by the outlet pipe or hose.
If the pump is installed in a well or
tank, lower and lift it by means of a
wire or chain fastened to the pump
handle.