Weekly Cleaning; Important - Federal TSSM2454SC-3 Instrucciones De Instalación Y Operación

Weekly Cleaning

NOTICE:
NOTICE:
NOTICE:
Note: Detergents are not recommended and do not use abrasive cleaners or pads to prevent
scratching of surfaces.
1. Remove interior shelving from unit as described in the "Shelving Installation and Removal"
section of this manual.
2. Saturate rag in warm soapy water and ring out thoroughly. Clean all shelves and shelf brackets
and dry with soft dry towel.
3. Saturate a rag in warm soapy water and ring out thoroughly. Clean the display deck(s) using
warm soapy water and a brush. Rinse thoroughly and allow dry. Wipe off fan shroud assembly
(do not rinse or submerge fan motors).
4. Clean the entire interior of the case using warm soapy water. Wipe off all soapy water with a
damp cloth and allow to dry. (DO NOT use solvents such as Acetone, Benzene, Carbon
Tetrachloride, and Lacquer Thinners)
5.
IMPORTANT: Cleaning the clear acrylic plastic front air deflector requires special care
to prevent hazing and yellowing of material. Clean as described in "Acrylic Air Deflector
Cleaning" section of this manual.
6. Reassemble all components in reverse order.
NOTE: Depending on the amount of usage and spillage of foreign material, some fasteners may
have to be removed and parts disassembled to allow proper cleaning of the unit.
Refrigerated Self-Serve Merchandiser (High Profile)
Avoid splashing or soaking any electrical components with water to
prevent electrical damage to the case.
Shut off lights and power switches and remove all products from case.
Allow sufficient time for the unit to reach room temperature before
proceeding with cleaning.
Remove all products from case before proceeding with cleaning
procedure.
Page 20