Operation Section - Toshiba MMY-MAP0501HT8-E Manual Del Propieratio

3
PARTS NAME OF REMOTE CONTROLLER
n Operation section
Push each button to select a desired operation.
• The details of the operation needs to be set up once, afterward, the air conditioner can be used by pushing
ON / OFF
button only.
12
2
5
3
1
FAN
button (Air volume select button)
Selects the desired air volume mode.
2
TIMER SET
button (Timer set button)
TIMER SET button is used when the timer is set up.
3
TEST
button (Check button)
The CHECK button is used for the check operation.
During normal operation, do not use this button.
4
VENT
button (Ventilation button)
Ventilation button is used when a fan which is
sold on the market is connected.
• If "No function
controller when pushing the Ventilation button, a
fan is not connected.
FILTER
5
RESET
button (Filter reset button)
Resets (Erases) "
6
SAVE
button (Power save operation)
No function
7
SWING/FIX
button (Swing/Wind direction button)
Selects automatic swing or setting the louver
direction.
• This function is not provided to Concealed Duct
Standard Type, High Static Pressure Type,
Floor Standing Cabinet Type, Floor Standing
Concealed Type, or Slim Duct Type.
8
Operation lamp
Lamp is lit during the operation.
Lamp is off when stopped.
Also it flashes when operating the protection
device or abnormal time.
English-9
TEMP.
TIMER SET
FILTER L LTER
RESET TEST SET
" is displayed on the remote
FILTER" display.
1 8
ON / OFF
FAN MODE
TIME SAVE AVE A VENT
CL SWING/FIX UNIT LOUVER T
9
ON / OFF
button
When the button is pushed, the operation starts,
and it stops by pushing the button again.
When the operation has stopped, the operation
lamp and all the displays disappear.
10
MODE
button (Operation mode select button)
Selects desired operation mode.
11
UNIT LOUVER
button (Unit/Louver select button)
Selects a unit number (left) and louver number
(right).
UNIT:
Selects an indoor unit when adjusting wind
direction when multiple indoor units are
controlled with one remote controller.
LOUVER (4-way Air Discharge Cassette
Type 2H series only):
Selects a louver when setting louver lock or
wind direction adjustment independently.
12
TEMP.
button (Set up temperature button)
Adjusts the room temperature.
Set the desired set temperature by pushing
TEMP .
OPTION :
Remote controller sensor
Usually the TEMP. sensor of the indoor unit senses
the temperature. The temperature on the surrounding
of the remote controller can also be sensed.
For details, contact the dealer from which you have
purchased the air conditioner.
• In case that one remote controller controls the
multiple indoor units, the setup operation is unavail-
able in group control.
9
9
10
4
11
6
7
or TEMP . .