Akron Brass 3531 Instrucciones De Instalación, Funcionamiento Y Mantenimiento página 12

TROUBLESHOOTING
If the unit fails to operate properly or stops:
A. Check the SPEED CONTROL knob. Make sure SPEED CONTROL is open.
B. Check operating pressure. Make certain an inlet pressure of at least 50 psi
(345 kpa, 3.4 bar) is maintained.
C. Check linkage arms to ensure that they are free of debris and that all bolts are in place and tight.
D. Make sure that the water turbine exhaust water can freely exit the turbine housing.
ISO 9001 REGISTERED COMPANY
PHONE: 330 . 2 64 . 5 678 or 800 . 2 28 . 1 161 I FAX: 330 . 2 64 . 2 944 or 800 . 5 31 . 7 335 I akronbrass . c om
WARRANTY AND DISCLAIMER: We warrant Akron Brass products for a period of five (5) years after purchase against defects in materials or workmanship. Akron Brass will repair or replace product
which fails to satisfy this warranty. Repair or replacement shall be at the discretion of Akron Brass. Products must be promptly returned to Akron Brass for warranty service.
We will not be responsible for: wear and tear; any improper installation, use, maintenance or storage; negligence of the owner or user; repair or modification after delivery; damage; failure to follow
our instructions or recommendations; or anything else beyond our control. WE MAKE NO WARRANTIES, EXPRESS OR IMPLIED, OTHER THAN THOSE INCLUDED IN THIS WARRANTY STATEMENT,
AND WE DISCLAIM ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR ANY PARTICULAR PURPOSE. Further, we will not be responsible for any consequential, incidental or
indirect damages (including, but not limited to, any loss of profits) from any cause whatsoever. No person has authority to change this warranty.
© Akron Brass Company . 2010 All rights reserved . No portion of this can be reproduced without the express written consent of Akron Brass Company .
revised: 2/10