Revert Smartkey ™ Electronic Key To Default Factory Setting; Clear Smartkey ™ Electronic Key Memory; Replacement Parts And Accessories - Petsafe SmartDoor PPA19-15791 Manual De Adiestramiento

Revert SmartKey Electronic Key to
.
™
Default Factory Setting
The Pet Door can be cleared of all additional programmed SmartKey Electronic Keys
™
EXCEPT the one included from the factory. To do this, first take out batteries from battery
compartment. Then, as you place batteries back into the battery compartment, hold
down the LEARN button. When LEARN button is held and the last battery is in place,
the red and green lights will illuminate three times. Now, all SmartKey Electronic Keys
™
programmed to the Pet Door have been cleared except the one SmartKey Electronic
™
Key included with your Pet Door.
Clear SmartKey Electronic Key
™
Memory
The Pet Door can be cleared of all programmed SmartKey Electronic Keys, even
™
the one included from the factory. To do this, first remove batteries from battery
compartment. Then, as you place batteries back into the battery compartment, hold
down the MODE-RESET button. When MODE-RESET button is held and the last battery
is in place, the red and yellow lights will illuminate three times. Now all SmartKey
™
Electronic Keys have been cleared.

Replacement Parts and Accessories

To purchase replacement parts for your PetSafe SmartDoor Electronic Pet Door,
® ™
contact the Customer Care Centre or visit our website at www.petsafe.net to locate a
retailer near you.
www.petsafe.net 19