Brinkmann Vertex Sear Manual Del Propietário página 27

Side
Burner
Valve
Burner Venturi
Step 7
Step 8
Valve
Nozzle
Attach side burner assembly to left
side panel using the two bolts that
were removed in step 5. Attach side
burner control panel to left side panel
using the bolt removed in step 4.
Remove the side burner by
unscrewing the pre-attached wing
nut on the side burner tray before
performing this step.
Wing Nut
Electrode
Insert the side burner valve
assembly through the holes in the
side burner control panel. Slide down
the valve to lock in place with key
holes.Then tighten pre-attached
bolts. Put side burner back in place.
Make sure that the burner venturi
aligns with the side burner valve.
Firmly seat the valve nozzle into the
burner venturi. Secure side burner
with wing nut. Tighten securely.
Place the side burner control knob
on the side burner valve stem.
26