DHC BT2100 Manual De Usuario página 16

One or more diodes in the alternator are not functioning or there is
stator damage. Check to ensure the alternator
mounting is affixed securely and that the belts are
in good shape and functioning properly. If the
mounting and belts are good, replace the
alternator.
Press the «ENTER» key to continue the charging system with accessory
loads. One of the three results will be displayed along with the actual
testing measured.
CHARGING SYSTEM LOW WHEN TEST WITH ACC. LOADS
The alternator is not providing sufficient current
for the system's electrical loads and the charging
current for the battery. Check the belts to ensure
the alternator is rotating with the engine running.
If the belts are slipping or broken, replace the belts and retest. Check
the connections from the alternator to the battery. If the connection
is loose or heavily corroded, clean or replace the cable and retest. If
the belts and connections are in good working condition, replace the
alternator.
CHARGING SYSTEM NORMAL WHEN TEST WITH ACC. LOADS
The system is showing normal output from the
alternator, no problem detected.
CHARGING SYSTEM HIGH WHEN TEST WITH ACC. LOADS
The voltage output from the alternator to the
battery exceeds the normal limits of a
functioning regulator. Check to ensure there are
no loose connections and that the ground connection is connected
- -
15